CONNECT EASE
Connect-Ease RCE24VBK 24-Volt Trolling Motor Connection Kit with Out On-Board Charging
Connect-Ease RCE24VBK 24-Volt Trolling Motor Connection Kit with Out On-Board Charging
SKU:CONRCE24VBK
In stock
Couldn't load pickup availability
- Genuine brand-name parts
- Ships from US warehouse
- 30-day returns
- THE STRAIGHT 24V TROLLING MOTOR WIRING KIT: Two 12V batteries, one pre-built series bridge, one plug to the motor. No onboard charging leads. Built for anglers who charge off the boat or with a portable charger.
- SERIES DONE FOR YOU: The bridge connector is wired for series before it ships, so the two batteries come out at 24 volts without you tracing a diagram over the gunwale. That is the single easiest place to make an expensive mistake, and it is handled.
- MARINE WIRE BUILT FOR THE SEASON: UL1426 tinned copper with heat-shrink butt splices, sealed against spray, salt and vibration. Tinned copper is the standard for boat rigging because bare copper corrodes.
- WORKS WITH LITHIUM, AGM AND LEAD-ACID: Fits 24V trolling motor systems and any 12V battery chemistry. Lithium holds voltage flat and keeps pushing current long after lead-acid has sagged, and a 100Ah lithium battery delivers roughly the usable capacity of a 200Ah lead-acid one. Corrosion-resistant quick connects keep resistance low where it counts.
- PULL A BATTERY IN UNDER A MINUTE: After the initial install, the connectors separate by hand for swaps, storage or trailering. Nothing to unbolt, nothing to drop in the bilge.
| Brand | CONNECT EASE |
|---|---|
| Manufacturer part number | RCE24VBK |
| UPC / GTIN | 854996005361 |
| Weight | 1.00 lb |
| Dimensions (L × W × H) | 11 × 7 × 2 in |
| Category | Electronics & Audio |
| Condition | New — genuine brand-name product |
Shipping & delivery
Shipping & delivery
Orders ship from the distributor warehouse closest to you, normally within 1–3 business days of purchase. Standard ground delivery takes 3–7 business days in the continental US; expedited options are shown at checkout. Oversized items (bumpers, running boards, large tonneau covers, some marine equipment) ship LTL freight — we contact you to schedule delivery and a signature is required.
Returns & warranty
Returns & warranty
Unused, uninstalled parts in original packaging can be returned within 30 days of delivery. A restocking fee of up to 20% may apply depending on the product and supplier, and return shipping is the buyer’s responsibility unless the item arrived defective, damaged or incorrect. Every product carries the full manufacturer warranty. Contact us with your order number to start a return.
Fitment & part numbers
Fitment & part numbers
Verify fitment with the manufacturer part number shown above and your vehicle’s year, make, model and trim. If the listing says “Fits select…”, confirm your exact application before ordering. Not sure? Send us your VIN and the part number and we’ll check it for you.
Share
