Connect-Ease 24V Trolling Motor Connection Kit RCE24VBCHK | Series Connection for 12V Batteries with Onboard Charging Charger Leads | Marine-Grade Components | Plug & Play | Batteries Not Included

The Connect Ease RCE24VBCHK is a 24v trolling motor connection kit.

Key features

• Wires Two 12V Batteries Into 24V: The bridge connector is pre-built for a series connection, so the batteries land at 24 volts. No tracing a diagram in a dark battery compartment, and no wrong post to land the jumper on. Snap it together and your 24V trolling motor is wired.
• Charge Without Unhooking Anything: Built-in 10 AWG onboard charger leads tie straight into your onboard charger. Plug in at the dock, walk away, and both batteries come up together. No pulling batteries, no loose ring terminals in the bilge.
• TINNED COPPER, END TO END: UL1426 tinned copper throughout, with 6 AWG battery-side connectors, 8 AWG motor leads, and heat-shrink butt splices sealed against spray, vibration and salt. Bare copper corrodes. That is why tinned is the marine wire standard.
• BUILT FOR LITHIUM AS WELL AS AGM AND LEAD-ACID: Lithium holds voltage flat and keeps pushing current long after lead-acid has sagged, so your wiring carries heavy load for more of the day. A 100Ah lithium battery delivers roughly the usable capacity of a 200Ah lead-acid battery, and sealed, corrosion-resistant contacts keep that extra current clean all the way to the motor.
• Pull A Battery In Under A Minute: After the one-time install, the quick connects come apart by hand. Swap a battery, take one home for winter, or drop the weight before a long tow. No wrench, no nut rolling into the bilge.

Specifications

Questions