Connect-Ease Yak-Ease Kayak Wiring Harness Kit RCE12VGPYAK | 8-Foot 10 AWG Wire, 3 Fused Drops | Powers Fish Finder, GPS & Kayak Fishing Accessories | 12V Quick Connect Plug, Marine-Grade Wiring Kit

• THREE FUSED DROPS OFF ONE BACKBONE: A 30A MAXI fuse guards the 10 AWG backbone, and three individual inline blade-fuse holders (3A and 5A included) protect each device separately. Blow a fuse on the fish finder and the GPS keeps running.
• 8 FEET OF 10 AWG BACKBONE, RUN IT WHERE YOU NEED IT: Long enough to reach from a stern battery box to bow-mounted electronics, heavy enough to carry real current the whole way. One central power spine instead of another zip-tied rat's nest.
• SB50 ANDERSON QUICK-CONNECT: A corrosion-proof SB50 connector handles the battery hookup, so pulling the battery for charging or winter storage takes seconds and no tools.
• MARINE-GRADE CONSTRUCTION, TOP TO BOTTOM: UL1426 tinned copper conductors and waterproof heat-shrink splices at every termination, built to resist corrosion in fresh and saltwater.
• RUNS ON LITHIUM OR LEAD-ACID, MADE IN PRIOR LAKE, MN: Compatible with any 12V lithium, AGM or sealed lead-acid battery. A 100Ah lithium battery delivers roughly the usable capacity of a 200Ah lead-acid battery, at a fraction of the weight. Battery not included.

The Yak-Ease Kayak Wiring Harness Kit is an 8-foot, 10 AWG power backbone that runs fused, dedicated power to up to three pieces of kayak electronics from a single 12V battery. Instead of splicing into one wire for every accessory, each device gets its own inline fuse holder off the main backbone. The backbone itself is protected by a 30A MAXI fuse; three inline blade-fuse holders (3A and 5A fuses included) sit on the individual drops, sized for fish finders, GPS units, and similar 12V accessories. A corrosion-proof SB50 Anderson connector handles the battery connection, so pulling the battery for charging or storage takes seconds and no tools. Construction: UL1426 marine-grade tinned copper wire and waterproof heat-shrink splices at every termination, built to hold up to salt spray, vibration, and temperature swings. Compatibility: Works with any 12V lithium, AGM, or sealed lead-acid battery. A 100Ah lithium battery delivers roughly the usable capacity of a 200Ah lead-acid battery, at a fraction of the weight — most of why compact lithium packs have taken over kayak rigging. What's included: 1 x 8-ft power backbone (10 AWG, 3 fused drops), SB50 Anderson connector, 1 x 30A MAXI fuse and waterproof holder, 3 x blade fuses (3A/5A), 3 x waterproof heat-shrink butt splices, cable ties, and an install guide. Made in Prior Lake, MN. Battery not included.